Quality meets affordability
- Get the classic look of rounded eaves
- Build it in an afternoon with common tools with our Slip-Fit technology
- Easily make it any size: single car, double car, three car or a tall RV cover
- Customize it with sheet metal walls, or add doors, windows and much, much more
Watch An Assembly Video
Classic Carport applications include:
- Car / truck / boat shelter
- RV / motor home cover
- Sport vehicle shelter
- Marine / boat dock cover
- Storage carport (Stor-Port)
- Pipeline sun shade
- Metering facility shelter
- Pump house
- Smoking shelter,
- Walkway cover
- Recreation shelter
- Batting cage
- Metal shed/utility cover
Classic Series Carports feature horizontal application of sheet metal panels with the traditional rounded look at the eaves.
The Classic design has been the mainstay of carport manufacturers and retailers for many years. And with the VersaTube Slip-Fit frame system, you can get our metal buildings up in a single afternoon using common tools.
The Classic carport is ideal for a wide range of shelter applications: single car, double car, three car, 3-sided, enclosed and as RV covers.
Carports Standard Sizes
Personalize your buildings with these accessories:
Available Colors (Roofing & Siding)
While colors have been matched as accurately as possible to the actual finish, representation of colors may vary due to monitor and printing limitations. Availability of colors are subject to change.
- Premium 29 gauge painted steel roofing and siding panels deliver a quality professional look
- Low maintenance, easy-to-clean finish resists chalking, fading, stains and dirt retention
- 80,000 PSI minimum yield strength
- 20-year limited paint warranty
- Color-matched trim and accessories included
VersaTube metal carports can be quoted with shipping to the following states. ALABAMA, AL, ARIZONA, AZ, ARKANSAS, AR, CALIFORNIA, CA, COLORADO, CO, CONNECTICUT, CT, DELAWARE, DE, FLORIDA, FL, GEORGIA, GA, IDAHO, ID, ILLINOIS, IL, INDIANA, IN, IOWA, IA, KANSAS, KS, KENTUCKY, KY, LOUISIANA, LA, MAINE, ME, MARYLAND, MD, MASSACHUSETTS, MA, MICHIGAN, MI, MINNESOTA, MN, MISSISSIPPI, MS, MISSOURI, MO, MONTANA, MT, NEBRASKA, NE, NEVADA, NV, NEW HAMPSHIRE, NH, NEW JERSEY, NJ, NEW MEXICO, NM, NEW YORK, NY, NORTH CAROLINA, NC, NORTH DAKOTA, ND, OHIO, OH, OKLAHOMA, OK, OREGON, OR, PENNSYLVANIA, PA, RHODE ISLAND, RI, SOUTH CAROLINA, SC, SOUTH DAKOTA, SD, TENNESSEE, TN, TEXAS, TX, UTAH, UT, VERMONT, VT, VIRGINIA, VA, WASHINGTON, WA, WEST VIRGINIA, WV, WISCONSIN, WI, WYOMING, WY,
VersaTube is proud to offer steel tubing made in the U.S.A. with gauges that range from 15 to 12 gauge depending size and configuration. Should you have an unusual load requirement, your dealer will be able to properly configure the design of your carport to meet these needs.
Yes. Our VersaTube Building System allows for any size carport or RV cover to be built up to 52′ wide, 16′ sidewall and unlimited length.
VersaTube offers sheet metal in nine standard colors and we will gladly search for colors outside our carport color chart.
Want to save some money? Build it yourself. VersaTube offers the premier do-it-yourself carport kits. Most VersaTube dealers offer kits and they are also available at most Home Centers such as Lowe’s, Home Depot, Menards and Sutherlands. We have a detailed step-by-step assembly manual to help you every step of the way. Our Slip Fit connections allow us to produce a carport kit that is easy to get home and easier to assemble. Your dealer is readily available to assist you or you may call our hot line for assistance at 800-900-7222 when assembling your carport.
VersaTube competitors only offer DIY carport kits in some instances. When our competitors do provide you a DIY carport kit, they usually just deduct 5% from the installed price. Worst of all, most of our competitors do not offer assembly instructions. Most will not provide customer support should their customers need it during assembly. It is always smart to check with the Better Business Bureau to be assured you are making the right choice concerning your buying decision.
VersaTube follows state and federal laws on sales tax. We do not charge taxes to the federal government, state government or any organization on products for resale with a valid Tax Exemption Number.
VersaTube uses a proprietary method when mandrel-bending side posts. VersaTube mandrel bends maintain the integrity and strength of the steel carport framing. Some models offered utilize single point compression bending.
VersaTube utilizes shaped tubing for 2 reasons. One, carports built with square or rectangular tubing are significantly stronger that those using round tubing. The flat surface on shaped tubing provides for easier assembly when applying screws and sheet metal panels.
VersaTube car ports are conveniently packaged and shipped on 40″ x 120″ pallets. Even the largest steel canopies can be delivered by any major shipping company using a standard pallet jack and lift gate.
Carports can be built on a number of flat surfaces following the anchoring procedures provided in the installation manual. The way to prepare the ground is to ensure there is a slight decline up to 4″ to ensure that water will run off and run off the back gable end, not the front.
16. Can VersaTube carports be built and then completely enclosed with additional materials at a later date?
The VersaTube Building System is designed for this exact purpose. Additional sections can be added and your carport can even be enclosed at a later date without issue.
Most RV covers we sell are 14′ x 38′ x 12′ and easily fit a motor home with an air conditioner underneath.
Yes, but attaching to an existing structure will require additional engineering.
Yes, our customer service hot line fields calls Mon-Fri from 8AM to 5PM
Authorized VersaTube dealers can install our carports as boat slips covers at their discretion.
The carport industry generally refers to an 18-foot carport as a doublewide. VersaTube offers doublewide units in both an 18′ and 20′ wide configuration. Additionally, our Suburban Series carport line is a full foot wider than the industry standard singlewide (12′ wide) and doublewide (18′ wide) carports. For two large vehicles, we recommend a 20′ x 20′ carport. For two small vehicles, an 18′ x 20′ carport may do the job.
You will find a link to our carport assembly manual in the top section of this page.
Generally our standard steel carport does not require truss braces in widths narrower then 20′ wide unless you have higher snow and wind load requirements. Most steel carports 20′ wide and wider require truss braces to meet local wind and snow load requirements.
VersaTube offer carports in a 3:12 roof pitch.
Snow and wind load conditions dictate the required on center spacing of a carport: VersaTube 10′ to 20′ wide carports are 4.5′ or 5′ on center. VersaTube 24′ to 30′ wide carports are 4′ or 4.5′ on center VersaTube Contractors Series 2″ x 4″ framing allows for carports wider than 30′.
Yes, as long as it is properly designed to carry the additional weight of the carport as well as the snow and wind load.
Yes. Our carports and RV covers come in many different styles. The Grand Series carport and the Suburban Series carport have the A-Frame style look.
Standard metal carports range from 8′ wide to 30′ wide and take 3 – 8 hours to assemble. Adding sidewalls, a front or back to your carport adds to the assembly time.
Here is the formula to calculate peak height (((Width / 2) x 3) / 12) + sidewall height
It is important to leave enough room to work around the perimeter of the metal carport for assembly purposes. We also recommend checking your local building codes.
VersaTube carports use common 7″ concrete anchor bolts that are installed using a hammer drill.
Our carports can be purchase with cash, Visa, MasterCard, American Express, Discover, money order, debit card, personal check, and business check or by PO (purchase order) to pre-qualified customers.
See our Dealer Locater and in cases where a carport dealer is not located in your proximity, give us a call 800-900-7222.
Our metal carports can be financed through credit accounts with mass merchants. Some of our dealers also offer financing. See our Dealer Builder Locater to find a dealer near you.
or call us (800) 810-2993