- Features vertical sheet metal roof panels and horizontal side panels
- Customize with pedestrian doors, garage doors and gables
- Engineered to meet local snow and wind load requirements in most areas
- Available in packaged kits, or frame only, and can be sheeted with a standard sheet metal package or add your own vinyl, wood, brick, stucco, or other roofing/siding alternative
Watch An Assembly Video
Frontier Building applications include:
- RV garage
- Commercial / Retail space
- Warehouse / Storage building
- Athletic / Recreational facility
- Group assembly venue
The Frontier X4 Series features vertical sheet metal roofing panels and horizontal siding panels applied to a 2” x 4” steel frame system with roof purlins, but no side girts are required.
No side girts mean less frame components, so the Frontier X4 design offers a lower cost alternative to the Summit X4 style.
Engineering certified to 52’ wide clearspan and 16’ high side height, construction time is drastically reduced with VersaTube’s patented Slip-Fit frame connections.
Personalize your buildings with these accessories:
Available Colors (Roofing & Siding)
While colors have been matched as accurately as possible to the actual finish, representation of colors may vary due to monitor and printing limitations. Availability of colors are subject to change.
- Premium 29 gauge painted steel roofing and siding panels deliver a quality professional look
- Low maintenance, easy-to-clean finish resists chalking, fading, stains and dirt retention
- 80,000 PSI minimum yield strength
- 20-year limited paint warranty
- Color-matched trim and accessories included
Metal Building FAQs
VersaTube buildings can be quoted with shipping to the following states. ALABAMA, AL, ARIZONA, AZ, ARKANSAS, AR, CALIFORNIA, CA, COLORADO, CO, CONNECTICUT, CT, DELAWARE, DE, FLORIDA, FL, GEORGIA, GA, IDAHO, ID, ILLINOIS, IL, INDIANA, IN, IOWA, IA, KANSAS, KS, KENTUCKY, KY, LOUISIANA, LA, MAINE, ME, MARYLAND, MD, MASSACHUSETTS, MA, MICHIGAN, MI, MINNESOTA, MN, MISSISSIPPI, MS, MISSOURI, MO, MONTANA, MT, NEBRASKA, NE, NEVADA, NV, NEW HAMPSHIRE, NH, NEW JERSEY, NJ, NEW MEXICO, NM, NEW YORK, NY, NORTH CAROLINA, NC, NORTH DAKOTA, ND, OHIO, OH, OKLAHOMA, OK, OREGON, OR, PENNSYLVANIA, PA, RHODE ISLAND, RI, SOUTH CAROLINA, SC, SOUTH DAKOTA, SD, TENNESSEE, TN, TEXAS, TX, UTAH, UT, VERMONT, VT, VIRGINIA, VA, WASHINGTON, WA, WEST VIRGINIA, WV, WISCONSIN, WI, WYOMING, WY,
VersaTube is proud to offer steel tubing made in the U.S.A. with gauges that range from 15 to 12 gauge depending size and configuration. Should you have an unusual load requirement, your dealer will be able to properly configure the design of your building to meet these needs.
Yes. Our VersaTube Building System allows for any size building or RV garage to be built up to 52′ wide, 16′ sidewall and unlimited length.
VersaTube offers sheet metal in nine standard colors and we will gladly search for colors outside our color chart.
Want to save some money? VersaTube offers premier do-it-yourself building kits. Most VersaTube dealers offer kits and they are also available at most Home Centers such as Lowe’s, Menards, Home Depot and Sutherlands. We have a detailed step-by-step assembly manual to help you every step of the way. Our Slip Fit connections allow us to produce a building kit that is easy to get home and easier to assemble. Your dealer is readily available to assist you. You may call our hot line for assistance at 800-900-7222.
VersaTube competitors only offer DIY building kits in some instances. When our competitors do provide you a DIY building kit, they usually just deduct 5% from the installed price. Worst of all, most of our competitors do not offer assembly instructions. Most will not provide customer support should their customers need it during assembly. It is always smart to check with the Better Business Bureau to be assured you are making the right choice concerning your buying decision.
VersaTube follows state and federal laws on sales tax. We do not charge taxes to the federal government, state government or any organization on products for resale with a valid Tax Exemption Number.
VersaTube uses a proprietary method when mandrel-bending side posts. VersaTube mandrel bends maintain the integrity and strength of the steel building framing. Some models offered utilize single point compression bending.
VersaTube utilizes shaped tubing for 2 reasons. One, buildings built with square or rectangular tubing are significantly stronger that those using round tubing. The flat surface on shaped tubing provides for easier assembly when applying screws and sheet metal panels.
VersaTube steel building kits are conveniently packaged and shipped on 40″ x 120″ pallets. Even the largest steel canopies can be delivered by any major shipping company using a standard pallet jack and lift gate.
Buildings can be built on a number of flat surfaces following the anchoring procedures provided in the installation manual.
16. Can VersaTube buildings be built and then completely enclosed with additional materials at a later date?
The VersaTube Building System is designed for this exact purpose. Additional sections can be added and your building can even be enclosed at a later date without issue.
Most RV garage kits we sell are 14′ x 40′ x 12′ and easily fit a motor home with an air conditioner underneath.
Yes, but attaching to an existing structure will require additional engineering.
Yes, our customer service hot line fields calls Mon-Fri from 8AM to 5PM
Authorized VersaTube dealers can install our buildings as boat slips covers at their discretion.
The building industry generally refers to an 24-foot building as a double car garage. VersaTube offers double car garage kits in both an 20′ and 24′ wide configuration. For two large vehicles, we recommend a 24′ x 24′ building. For two small vehicles, an 20′ x 20′ building may do the job.
You will find a link to our building assembly manual in the top section of this page.
Generally our standard steel building does not require truss braces in widths narrower then 20′ wide unless you have higher snow and wind load requirements. Most steel buildings 20′ wide and wider require truss braces to meet local wind and snow load requirements.
VersaTube offer buildings in a 3:12 roof pitch.
Snow and wind load conditions dictate the required on center spacing of a building: VersaTube 12′ to 20′ wide buildings are 5′ on center. VersaTube 24′ to 30′ wide buildings are 4′ or 5″ on center VersaTube Contractors Series 2″ x 4″ framing allows for buildings wider than 30′.
Yes, as long as it is properly designed to carry the additional weight of the building as well as the snow and wind load.
Yes. Our buildings and RV garages come in many different styles. The Summit Series building and the Frontier Series building have the A-Frame style look.
Standard metal buildings range from 12′ wide to 52′ wide and take 6 – 48 hours to assemble. Adding sidewalls, a front or back to your building adds to the assembly time.
Here is the formula to calculate peak height (((Width / 2) x 3) / 12) + sidewall height
It is important to leave enough room to work around the perimeter of the metal building for assembly purposes. We also recommend checking your local building codes.
VersaTube buildings use common 7″ concrete anchor bolts that are installed using a hammer drill.
Our metal metal building can be financed through credit accounts with mass merchants. Some of our dealers also offer financing. See our Dealer Locater to find a dealer near you.
Our buildings can be purchase with cash, Visa, MasterCard, American Express, Discover, money order, debit card, personal check, and business check or by PO (purchase order) to pre-qualified customers.
See our Dealer Locater and in cases where a building dealer is not located in your proximity, give us a call 800-900-7222.
Framing for one gable end door opening is included in the standard building package. Other gable end modifications are available if requested and approved in advance by VersaTube. Eave side door openings in 8’, 10’, 12’ and 14’ heights and widths up to 12’ are also available. Reference the listing in the appropriate product section of this binder or in the separate pricing booklet.
No overhead doors are included in the standard building package, but may be added to the order. Reference the required model number in the appropriate section of this binder or in the separate pricing booklet.
One kit is included in the standard building package. Additional 3’0” wide x 6’8” high side entry door frame kit for eave side installation. Reference the listing in the appropriate product section of this binder or in the separate pricing booklet.
No pedestrian doors are included in the standard building package, but may be added to the order. Reference the series number and style in the appropriate section of this binder or in the separate pricing booklet.
No window frames are included in the standard building package, but may be added to the order. 2’-3’ wide x 3’-5’ high window frame kit for eave side installation. Reference the listing in the appropriate product section of this binder or in the separate pricing booklet.
No windows are included in the standard building package, but may be added to the order. Reference the series number, style and size in the appropriate section of this binder or in the separate pricing booklet.
Indicate choice of insulation – Reflective Radiant Barrier or VRR (with desired thickness). Reference the listing in the appropriate product section of this binder or in the separate pricing booklet.
or call us (800) 810-2993