 |
| Frontier Garage & Building Series |
|
|
|
| |
The Frontier Garage Series features vertical sheet metal roofing panels and horizontal siding panels, requiring roof purlins but no side girts. No side girts mean fewer frame components, so the Frontier design offers a lower cost alternative to the Summit building style. Engineering certified to 30’ wide and up to 12’ sidewall height, assembly time is drastically reduced with VersaTube’s patented Slip-Fit frame connections.
|
|
| Standard Sizes |
| Width |
12', 14', 20', 24' and 30'
Using 2" x 3" steel tube frame
|
| Height |
From 8', 10' and 12' exterior side |
| Length |
18' and 20' minimum lengths
(18' minimum frame length)
Length extensions in 4', 5' or 6' on-center spacing depending on the model
|
| Roof Pitch |
3:12 |
| Custom Sizes |
Available |
|
| |
|
Options / Accessories
- Gable End & Eave Side Door Framing
- Insulation Package
- Garage Doors
- Extra Side Entry Pedestrian Door Frame
- Pedestrian Doors
- Window Frame
- Windows
- 26-Gauge Sheet Metal
|
|
- Primary framing uses 2” x 3” rectangular steel tubing for structures engineered up to 30’ wide and 12’ high (sidewall).
|
- Designed and engineered ideally for installation on a concrete slab. May also be installed on concrete stem walls, footings, or piers.
|
- Standard packages include frame system with self-drilling screws, 29-gauge premium sheet metal & trim package with screws, framing for one gable-end door opening, framing for one side entry pedestrian door opening, and concrete anchor bolts.
|
- The garage and pedestrian doors, windows, concrete work and installation are not included in the standard package. Doors and windows are available options.
|
Garage Truss Bracing
|
| Interior truss bracing may be required by engineering depending on the garage dimensions and your local snow and wind load requirements. |
|
| 12’ and 14’ wide units |
Standard: None required High Load: Type 2 |
| 20’ wide units |
Standard: Type 1 or 2 High Load: Type 3 |
| 24’ wide units |
Standard and High Load: Type 3 |
| 30’ wide units |
Standard and High Load: Some Type 2, but Most Type 3 |
|
|
| Truss braces are used on all interior truss frame sections and ARE NOT REQUIRED for the front and back end truss sections. |
| |
.jpg) No Bracing |
.jpg) Type 1 Bracing |
.jpg) Type 2 Bracing |
 Type 3 Web Bracing |
|
| |
.jpg)
.JPG)
