Cover your boat dock or marina slip with the strength and durability of a steel shelter. Both Classic and Grand designs are available depending on your style preference and coverage need. The VersaTube Slip-Fit frame system assembles quickly and is ready to anchor to your site. Custom sizes available to fit your specific dimensions, as well as frame only packages for those who want to use soft pull-over canvas covers.
Boat Dock Covers Standard Sizes
Width
10', 12', 14', 18', 20', 24' and 30'
Using 2" x 2" and 2" x 3"
steel tube frame
Height
Up to 12' exterior side
Length
20' minimum roof coverage length
(18' minimum frame length)
Length extensions in 4', 4.5' or 5' on-center spacing depending on the model
Roof Pitch
3:12
Options / Accessories
Additional Side Sheet Metal Panels
Back Enclosure Kit
Front Enclosure Kit with Garage Door Framing
Garage Doors
Side Entry Pedestrian Door Frame
Pedestrian Doors
Window Frame
Windows
26-Gauge Sheet Metal
Primary framing uses 2” x 2” square and 2” x 3” rectangular steel tubing for structures engineered up to 30’ wide and 12’ high (sidewall).
Install on ground, concrete slab or footings or piers, or any level surface per anchoring instructions. Must be installed with one end slightly raised to allow water runoff. Your choice of concrete or ground stake anchors.
Standard packages include frame system with self-drilling screws, 29-gauge sheet metal & trim package with screws, butyl caulk tape, vinyl trim, and your choice of anchors. (You will need to provide anchors if other than ground stake or concrete anchors.)
Boat Dock Covers Truss Bracing
Interior truss bracing may be required by engineering depending on the carport dimensions and your local snow and wind load requirements. Typically, 10’, 12’, 14’ and some 18’ and 20’ models do not require truss bracing. Some 18’ and 20’ and all 24’ and wider units are sold with truss bracing. Truss braces are used on all interior truss frame sections and ARE NOT REQUIRED for the front and back truss sections of boat dock covers.
.jpg)
No Bracing.jpg)
Type 1 Bracing.jpg)
Type 2 Bracing
Type 3 Web Bracing