Your recreational vehicle or travel trailer represents a significant and expensive investment. A metal RV cover or shelter offers premium protection from the elements with the strength and durability of steel. Both Classic and Grand designs are available depending on your style preference and coverage need. And with VersaTube’s patented Slip-Fit frame connections, assembly is quicker and installation time is reduced. VersaTube is also the brand of choice for many commercial RV storage facilities. Custom sizes available to fit your specific RV cover requirements.
RV Covers Standard Sizes
Width
12', 14', 18', 20', 24' and 30'
Using 2" x 2" and 2" x 3"
steel tube frame
Height
Up to 12.5' exterior side
Length
20' minimum roof coverage length
(18' minimum frame length)
Length extensions in 4', 4.5' or 5' on-center spacing depending on the model
Roof Pitch
3:12
Custom Sizes
Available up to 52’ wide and 16’ side height using 2” x 4” steel tube frame
Options / Accessories
Additional Side Sheet Metal Panels
Back Enclosure Kit
Front Enclosure Kit with Garage Door Framing
Garage Doors
Side Entry Pedestrian Door Frame
Pedestrian Doors
Window Frame
Windows
26-Gauge Sheet Metal
Primary framing uses 2” x 3” rectangular steel tubing for structures engineered up to 30’ wide and 12’ high (sidewall). 2” x 4” steel tubing is used for carports engineered over 30’ up to 52’ wide and up to 16’ high (sidewall).
Install on ground, concrete slab or footings or piers, or any level surface per anchoring instructions. Must be installed with one end slightly raised to allow water runoff. Your choice of concrete or ground stake anchors.
Standard packages include frame system with self-drilling screws, 29-gauge sheet metal & trim package with screws, butyl caulk tape, vinyl trim, and choice of anchors for your RV cover.
RV Covers Truss Bracing
Interior truss bracing may be required by engineering depending on the carport dimensions and your local snow and wind load requirements. Typically, 10’, 12’, 14’ and some 18’ and 20’ models do not require truss bracing. Some 18’ and 20’ and all 24’ and wider units are sold with truss bracing. Truss braces are used on all interior truss frame sections and ARE NOT REQUIRED for the front and back end truss sections.
.jpg)
No Bracing.jpg)
Type 1 Bracing.jpg)
Type 2 Bracing
Type 3 Web Bracing