VersaTube User Guide
Design ID: 12011
Customer Name
50 Eastley Street
Collierville, TN 38017
Order Date: 10/10/2015
Selected Part Name:
With Side Hat Channel (Girts)
With Roof Hat Channel (Purlins)
WIDTH
24"
LENGTH
20"
HEIGHT
(SIDEWALL)
8"
TYPE / WIDTH
Continuos / 8'
TYPE / WIDTH
Step-down / 7'
This structure is engineered to meet or exceed your local building code requirements of:
105lbs
GROUND SNOW LOAD
85lbs
ROOF SNOW (LIVE) LOAD
90MPH
WIND LOAD
* Source: IBC 2009 data for Collierville, Tennessee 38344 in Shelby County.
ROOF
PITCH
3:12
ON CENTER
SPACING
4'
TRUSS BRACE
TYPE
Type 3
GROUND-TO-
TRUSS CLEARANCE
7'
FRAME
WEIGHT
1200 lbs
FRAME
2" x 3"
14 Gauge Galvanized Tube
Domestic Steel - 67% Recycled
ROOF
PURLINS
18 Gauge Galvanized Roof Purlins
3' On Center Spacing
SIDEWALL
GIRTS
18 Gauge Galvanized Roof Purlins
4' On Center Spacing
FRONT/BACK
WALL GIRTS
1.5" Square 18 Gauge Galvanized Flush Mount Girts
4' On Center Spacing
FRONT/BACK
WALL VERTICALS
2" Square 15 Gauge Galvanized Front / Back Wall Verticals
RIB
SPACING
9"
with 5 major ribs & minor ribs
RIB
HEIGHT
3/4"
with 36" coverage
Anti-siphon feature
Durable, baked-on paint finish
Roof Sheet Metal
WHITE
Eave Trim
WHITE
Gable Trim
WHITE
Ridge Cap
WHITE
Side Sheet Metal
WHITE
Door Trim
WHITE
Corner Trim
WHITE
J-Channel Trim
WHITE
Inside Closure Strip
Outside Closure Strip
R-PANEL Inside Closure Strip
R-PANEL Outside Closure Strip
Transition Trim
WHITE
1ROOF COLOR
Green
2WALL COLOR
Stone
3TRIM COLOR
Green
114 PARTS
36 PARTS
This is front enclosure block
This is back enclosure block
28 PARTS
114 PARTS
114 PARTS
Maximum allowable soil bearing pressure is 1000psf in accordance with Applicable code. Owner to verify that soil is stable and compacted to a Minimum of 95% relative optimum value.
Maximum size concrete aggregate shall be 1” dia.
Minimum compressive strength of concrete at 28 days shall be 2500 psi.
Place reinforcement at mid depth for slabs on grade.
All splices in continuous reinforcement or reinforcing shall have a minimum lap of 40 diameters. Splices in adjacent bars shall not be less than 4’-0” apart. Vertical wall bars shall be spliced at or near floor lines. Bars may be wired together at splices or laps except for top reinf. Of beam and slabs, or where specifically detailed to be separated.
Concrete shall be placed in accordance with the latest aci specifications.
This is strictly a suggested foundation design. Other engineered designs may be substituted or dictated by your municipality or inspector.
Installation: Using Hammer drill and a 1/2" concrete drill bit, drill a hole into the concrete 5" to 5 1/2" deep. Place the flat washer on the bolt and install the nut until about 2 threads are exposed above the nut. Tap the anchor through the base rail into the hole until the washer touches the top of the base rail. Now, tighten the nut to set the anchor. Do not over tighten and crush the tube.
This is strictly a suggested foundation design. Other engineered designs may be substituted or dictated by your municipality or inspector.
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
2x3-EBR-6-6
Blueprint
Blueprint
Blueprint
Blueprint
Blueprint
Pledge is our way of showing that we’re proud of our products and the level of quality that they represent. Your building will go through an extensive inspection process prior to leaving our plant, but if any component should not meet your expectations, we’ll be glad to replace the part at no charge within 30 days of purchase.
The only criteria that must be met is that you bought the building from VersaTube, the damage wasn’t caused by customer modifications or mishandling, and that the building was erected within 30 days of purchase.
The second part of the VersaTube Product Pledge provides a 20 year structural warranty on all framing components of our buildings from the date of purchase. Of course, the defect can’t be caused by customer modifications or negligence, an unanticipated Act of God or nature, an accident, or any type of internal or external impact. Improper assembly or installation may also void the warranty.
The customer is responsible for performing standard building maintenance and inspections on a regular basis. We reserve the right to repair or replace any part that might not meet expectations.
VersaTube is proud to put our name on the buildings we manufacture for our customers and stand behind their quality with our industry leading Product Pledge.
Print User Guide
